Gen3-DM3 ASA Pipe Adapter for Starlink Gen 3 — 37.8-49.8mm Pole Mount, 440 lbs
Product Type
Pipe Adapter / Pole Mount Kit
Material
ASA
Color
White
Size
7.4" × 5.5" × 3.93" / 188mm × 140mm × 100mm
Pipe Diameter
1.49" – 1.96" / 37.84mm – 49.78mm
Load Capacity
Up to 440 lbs / 200kg (Manufacturer Rated)
Specifications
| Part No | Gen3-DM3 |
|---|---|
| Product Type | Pipe Adapter / Pole Mount Kit |
| Material | ASA |
| Color | White |
| Size | 7.4" × 5.5" × 3.93" / 188mm × 140mm × 100mm |
| Pipe Diameter | 1.49" – 1.96" / 37.84mm – 49.78mm |
| Load Capacity | Up to 440 lbs / 200kg (Manufacturer Rated) |
| Included Hardware | Carbon Steel Screws + Installation Tool / Hardware Kit |
| Documentation | User Installation Guide |
| Compatibility | Starlink Gen 3 Standard |
Product Details
37.84–49.78mm Pole Fit
Compatible with poles from 1.49″ to 1.96″ (37.84mm–49.78mm) in diameter — check your pole size against the range before installation to ensure a proper, secure match. Confirm the pole OD before ordering.
UV-Stable ASA Material
ASA construction holds up to prolonged sun exposure and weather, maintaining its white finish and structural integrity through years of outdoor mounting duty without yellowing or brittleness. Long-term color and strength retention are built in.
440 lbs Rated Load Capacity
Manufacturer-rated for up to 440 pounds / 200kg, the adapter gives reliable support for the Gen 3 Standard dish in exposed rooftop and mast positions with generous margin. The rating suits rooftop and mast duty.
Complete Hardware Kit
Ships with a set of carbon steel screws plus an installation tool / hardware kit, so the pole mount can be fully assembled with the components included in the box. Package includes: Carbon Steel Screws + Installation Tool / Hardware Kit.
Guided Installation
A user installation guide walks through fitting, alignment and tightening steps, reducing guesswork for first-time installers and keeping service crews consistent on repeat jobs. Every step is documented for repeatable results. Overall size: 7.4″ × 5.5″ × 3.93″ / 188mm × 140mm × 100mm.
Application Scenarios
Rooftop Pole Mounting
Mount the Gen 3 Standard dish on a 37.8–49.8mm roof pole, using the ASA clamp and carbon steel screws for a stable, weather-resistant fit.
RV & Camper Setup
Fix the dish to a camper roof pole within the 1.49"–1.96" range, with the 440 lbs rating holding through highway vibration and campsite winds.
Mast & Off-Grid Sites
Deploy on masts at remote or off-grid locations, following the included guide to torque the hardware kit correctly for long-term reliability.
Product Gallery
