GEN3-ACDC-1 195W AC/DC Power Adapter for Starlink Gen 3 — 57V 3.42A, Waterproof Gasket
Product Type
AC/DC Power Adapter
Input Voltage
AC 100V-240V ~ 50/60Hz, 5A Max
Output Voltage
DC 57V 3.42A Max, 194.94W
Converter Wire Length
1.05M / 41.34 inch / 3.44FT
DC Plug Wire Length
0.96M / 37.8 inch / 3.15FT
Barrel Jack Type
Barrel Jack Male with SL Proprietary Waterproof Gasket
Specifications
| Part No | GEN3-ACDC-1 |
|---|---|
| Product Type | AC/DC Power Adapter |
| Input Voltage | AC 100V-240V ~ 50/60Hz, 5A Max |
| Output Voltage | DC 57V 3.42A Max, 194.94W |
| Converter Wire Length | 1.05M / 41.34 inch / 3.44FT |
| DC Plug Wire Length | 0.96M / 37.8 inch / 3.15FT |
| Barrel Jack Type | Barrel Jack Male with SL Proprietary Waterproof Gasket |
| Barrel Jack Dimensions | 5.5mm OD × 2.1mm ID |
| Protection | Over-current, Short-circuit, Input Voltage Variation |
| Indicator | LED Power Indicator |
| Compatibility | Starlink Gen 3 |
Product Details
195W AC to DC Conversion
Provides DC 57V at up to 3.42A (194.94W max) for compatible Starlink Gen 3 power setups, converting standard mains AC into the regulated DC feed the supported equipment requires. The rated output matches the dish’s power demand.
Wide 100–240V AC Input
Accepts 100–240V AC at 50/60Hz up to 5A max, making the adapter usable across regions with different mains voltage standards — one part number covers multiple markets and voltage regimes. Rated for AC 100V-240V ~ 50/60Hz, 5A Max input.
Sealed Waterproof Barrel Jack
A 5.5mm outer × 2.1mm inner barrel jack with the SL proprietary waterproof gasket protects the DC connection from moisture and debris in exposed installation environments, indoors or out. The sealed joint stays dependable over time.
Built-In Protection Functions
Over-current, short-circuit and input voltage variation protection safeguard the adapter and connected hardware during normal operation, including unattended or continuous use where faults must not propagate. The adapter shuts down safely instead of letting faults pass through.
LED Indicator & Full Cable Set
An LED power indicator shows operating status at a glance, and AC plus DC power cables are supplied with the unit for direct equipment connection straight out of the box. Output rating: DC 57V 3.42A Max, 194.94W.
Application Scenarios
Residential Installation
Replace or supplement the Gen 3 power supply with the 195W adapter — the 100–240V input pairs with regional outlets while the 57V / 3.42A output matches the dish's power requirement.
RV & Mobile Power
Feed the Gen 3 dish from AC sources at RV parks or work sites; the waterproof-gasket barrel jack keeps the DC link protected through repeated connect and disconnect cycles.
Off-Grid & Backup
Pair the adapter with inverter-based power systems for temporary or backup deployments, relying on over-current and short-circuit protection during unattended operation.
Product Gallery
